TAK Technology
MnZn · 3 shape groups · 4 part numbers · Catalogue p. 141–142
UT / OT / FP CoreU-type Cores
F calculated by FDWEB
Fig.1
| P/N | Dimensions · mm (nominal / tolerance) | Effective parameters F | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | H(mm) | C1mm⁻¹ | C2mm⁻³ | Lemm | Aemm² | Vemm³ | ≈Wtg | |
| UT20 | 20.60±0.50 | 14.10±0.30 | 4.60±0.30 | 4.20±0.20 | 2.40±0.20 | 2.30±0.30 | 4.38 | 0.3626 | 52.87 | 12.08 | 638.38 | 3.84 |
| UT21.5 | 21.50±0.50 | 14.90±0.30 | 4.50±0.30 | 4.20±0.30 | 3.50±0.30 | 2.65±0.30 | 3.79 | 0.2598 | 55.33 | 14.59 | 807.49 | 4.49 |
Fig.2
| P/N | Dimensions · mm (nominal / tolerance) | Effective parameters F | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | H(mm) | C1mm⁻¹ | C2mm⁻³ | Lemm | Aemm² | Vemm³ | ≈Wtg | |
| OT22.65×21×6.45C | 22.95±0.35 | 21.30±0.35 | 6.75±0.25 | 7.70±0.25 | 12.40±0.30 | — | 1.59 | 0.0427 | 59.04 | 37.17 | 2194.64 | 10.05 |
Fig.3
| P/N | Dimensions · mm (nominal / tolerance) | Effective parameters F | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | H(mm) | C1mm⁻¹ | C2mm⁻³ | Lemm | Aemm² | Vemm³ | ≈Wtg | |
| FP77.4×41.4×15 | 77.40±1.50 | 41.40±0.80 | 15.00±0.30 | 24.70±0.70 | 60.70±1.20 | — | 1.57 | 0.0126 | 197.03 | 125.25 | 24678.29 | 113.00 |
C:
This table only shows common product numbers. If the UT core you need is not listed in the above table, please do not hesitate to contact us.
Calculated from nominal dimensions per IEC 60205: C1 = ΣL/A, C2 = ΣL/A², Le = C1²/C2, Ae = C1/C2, Ve = Le×Ae; Amin = minimum cross-section; values for paired sets apply to the assembled set. ≈Wt is a reference fired-core weight — actual values vary with material and sintering, not a specification commitment; part numbers not listed have no effective-parameter data yet.